ACD
Advanced Calibration Designs, Inc.
Certified Calibration Gas Solutions
Distributor Log In

ACD Advanced Calibration Designs, Inc. Advanced Calibration Designs, Inc.

Advanced Calibration Designs, Inc.

Sept-30 - Oct-4, Chicago, Ill
Booth# 7849
RETA
Sept-26-29, Hershey, PA
Booth# 104

How Do I Calibrate my Gas Sensor for Hexane (C6H14)?

  Flow / Output Source / Cell life
QC-50 N/A 8 hours / vial
QC-100 N/A 8 hours / vial
How do I calibrate my gas sensor for Hexane (C6H14)?Hexane gas is found in many applications where it is used as a solvent in a process. The main applications are in glues for leather applications such as shoes and saddles. It is also very prevalent in cooking oil facilities where it is used to extract the oil from the seeds including sunflower and cotton seed. Hexane is also used in the manufacture of roofing materials and textiles

 

 

 

The following instruments provide hexane calibration gas:
ACD QC-50 Ammonia bump tester

QC-50 Calibration Gas Bump Tester
(850-1050-00)

The QC-50 from provides a quick and easy method of checking the performance of gas detection systems. The QC-50 utilizes revolutionary technology allowing a functional check (or 'bump test') as needed or required by law. The unique QuickCheck Vial (QCV) utilizes a stable, safe and reliable delivery method allowing ease of shipment, storage and use. The QC-50 is currently available for ammonia, hydrogen chloride, toluene and hexane.

The QCV used in the QC-50 are small, disposable vials with a small amount of the gas to be tested in liquid form in a sealed inner ampoule. Breaking the inner ampoule allows the liquid to absorb into a filter which then diffuses out the gas. Simply squeezing the hand aspirated bulb will allow a test concentration of gas to flow by the gas detector, verifying its operation.

More gases from this instrument:

ammonia calibration gas hexane calibration gas hydrogen chloride calibration gas toluene calibration gas

ACD QC-100 Ammonia bump tester

QC-100 Calibration Gas Bump Tester
(850-1100-00)

The QC-100 provides a quick and easy method of checking the performance of gas detection systems. The QC-100 utilizes revolutionary technology allowing a calibration functional check or 'bump test' as needed. The unique QuickCheck Vials (QCV) utilize a stable, safe and reliable delivery method allowing ease of shipment, storage and use. The QC-100 is currently available for ammonia and hydrogen chloride as well as PPM ranges of hexane and toluene.

The QCV used in the QC-100 are small, disposable vials with a small amount of the gas to be tested in liquid form in a sealed inner ampoule. Breaking the inner ampoule allows the liquid to absorb into a filter which then diffuses out the gas. The motorized pump in the QC-100 provides a continuous output of calibration check gas, and the needle-valve allows users to adjust the amount of gas being generated. This gas concentration can be checked against a calibrated instrument for higher accuracy, or simply used as a bump test device.

The QC-100 bump tester is CE approved

 

More gases from this instrument:

ammonia calibration gas hexane calibration gas hydrogen chloride calibration gas toluene calibration gas