ACD
Advanced Calibration Designs, Inc.
Certified Calibration Gas Solutions
Distributor Log In

ACD Advanced Calibration Designs, Inc. Advanced Calibration Designs, Inc.

Advanced Calibration Designs, Inc.

How Do I Calibrate my Gas Sensor for Toluene (C7H8)?

  Flow / Output Source / Cell life
QC-50 N/A 8 hours / vial
QC-100 N/A 8 hours / vial
Permissible Exposure Limits for this gas:
TWA (Time Weighted Average): 200
STEL (Short Term Exposure Limit): 500
ACD toluene calibration gasToluene is a volatile organic compound that has many solvent applications. It is used as a solvent because of its' ability to dissolve paint, paint thinners, rubber, ink, and glues. It is also used in the manufacture of TNT and polyurethane foam. It is not only combustible, but also toxic. Toluene is a strong oxidizer and is used as a fuel additives in many places.

 

 

 

 

The following instruments provide toluene calibration gas:
ACD QC-50 Ammonia bump tester

The QC-50 Calibration Gas Bump Tester
(850-1050-00)

The QC-50 from Advanced Calibration Designs provides a quick and easy method of checking the performance of gas detection systems. The QC-50 utilizes revolutionary technology allowing a functional check (or 'bump test') as needed or required by law. The unique QuickCheck Vial (QCV) utilizes a stable, safe and reliable delivery method allowing ease of shipment, storage and use. The QC-50 is currently available for ammonia, hydrogen chloride, toluene and hexane.

The QCV used in the QC-50 are small, disposable vials with a small amount of the gas to be tested in liquid form in a sealed inner ampoule. Breaking the inner ampoule allows the liquid to absorb into a filter which then diffuses out the gas. Simply squeezing the hand aspirated bulb will allow a test concentration of gas to flow by the gas detector, verifying its operation.

More gases from this instrument:

ammonia calibration gashydrogen chloride calibration gastoluene calibration gashexane calibration gas

 

ACD QC-100 Ammonia bump tester

The QC-100 Calibration Gas Bump Tester
(850-1100-00)

The QC-100 provides a quick and easy method of checking the performance of gas detection systems. The QC-100 utilizes revolutionary technology allowing a calibration functional check or 'bump test' as needed. The unique QuickCheck Vials (QCV) utilize a stable, safe and reliable delivery method allowing ease of shipment, storage and use. The QC-100 is currently available for ammonia and hydrogen chloride as well as PPM ranges of hexane and toluene.

The QCV used in the QC-100 are small, disposable vials with a small amount of the gas to be tested in liquid form in a sealed inner ampoule. Breaking the inner ampoule allows the liquid to absorb into a filter which then diffuses out the gas. The motorized pump in the QC-100 provides a continuous output of calibration check gas, and the needle-valve allows users to adjust the amount of gas being generated. This gas concentration can be checked against a calibrated instrument for higher accuracy, or simply used as a bump test device.

The QC-100 bump tester is CE approved

More gases from this instrument:

ammonia calibration gashydrogen chloride calibration gastoluene calibration gashexane calibration gas